Some names belong to real products in another context. Read the explanation before deciding whether a work request is a joke.
84 entries in the catalogue.
Fake toolsA wire stretcher is a real fencing tool. But if an electrician wants one to make a cable cut too short reach a terminal, you are probably being sent on a fool’s errand. A fencing tensioner pulls existing wire taut; it does not manufacture extra cable.
Read the explanation of Wire stretcher →Fake toolsA board stretcher that restores missing length to a board cut too short is an apprentice joke. Wood can change dimensions with moisture, but an ordinary workshop tool cannot put the sawn-off material back.
Read the explanation of Board stretcher →Fake toolsIn the classic apprentice errand, a pipe stretcher is an imaginary tool for making a cut pipe longer. Real tube expanders and swaging tools change ends or diameters; that does not make them a magic remedy for a missing length.
Read the explanation of Pipe stretcher →Fake toolsA sky hook that supports a load from thin air is a joke. Real lifting products use the name Skyhook, so the name alone is not proof of a prank. The imaginary version has no supporting structure at all.
Read the explanation of Sky hook →Fake toolsAn ordinary screwdriver can be held in either hand. The special “left-handed screwdriver” you are sent to fetch is usually a joke about unnecessary handedness. Left-hand screw threads are real; they do not automatically require a differently handed screwdriver.
Read the explanation of Left-handed screwdriver →Fake toolsThe classic left-handed hammer errand asks for a separate handed version of a plain hammer that either hand can hold. Ergonomic designs and genuinely asymmetric tools complicate blanket claims, but they do not make this old setup reliable tool advice.
Read the explanation of Left-handed hammer →Fake toolsAn adjustable wrench can fit both metric and imperial fasteners within its jaw range. Wrenches with metric scales and metric-sized overall lengths are real. The prank is insisting that a normal adjustable wrench cannot fit a bolt simply because the bolt uses another measurement system.
Read the explanation of Metric adjustable wrench →Fake toolsLeft-handed wrench requests are a traditional joke, but adjustable wrenches with different adjustment directions and other specialist designs do exist. Ask which model or mechanism is intended before assuming the whole category is imaginary.
Read the explanation of Left-handed wrench →Fake toolsA glass hammer offered as an ordinary robust workshop hammer is a traditional fool’s-errand object. Hammers for breaking glass are real and are not made of glass. Decorative or scientific objects can also have names that resemble the joke.
Read the explanation of Glass hammer →Fake toolsThe skirting-board ladder is a workshop joke about using a ladder to reach trim close to the floor. “Baseboard ladder” conveys the same idea in language more familiar to many North American readers.
Read the explanation of Skirting-board ladder →Fake materialsStriped or tartan paint that deposits a neat repeating pattern straight from one ordinary tin is the joke. Decorative multicolour coatings and techniques are real, but a brush does not organise itself into a tartan pattern because the label says so.
Read the explanation of Striped paint →Fake suppliesYou cannot buy a loose replacement bubble to drop into an ordinary spirit level. The bubble is the unfilled space in a sealed liquid-filled vial. Replacement vials exist for some serviceable levels; that is a different and genuine request.
Read the explanation of Spirit-level bubble →Impossible errandsFetching steam in an ordinary open bucket is a fool’s errand. Steam is water vapour, and the familiar white plume is condensed droplets. Neither is a stable bucketful of workshop stock that can be carried back like bolts.
Read the explanation of Bucket of steam →Wordplay errandsA “long weight” is usually a spoken pun on “long wait”. A “long stand” produces the same result while you stand at a counter. It is not a mysterious tool specification unless the requester can identify an actual weighted item.
Read the explanation of Long weight →Fake fluidsBlinker fluid is a joke. Vehicle indicators use electrical lamps or LEDs, not a fluid reservoir that needs topping up. Headlight-fluid and taillight-fluid errands use the same invented-maintenance idea.
Read the explanation of Blinker fluid →Fake partsMuffler bearings are an imaginary automotive part in the classic joke. An ordinary muffler quietens exhaust; it does not contain a rotating bearing set to replace. Other exhaust components can have moving parts, so ask which assembly is actually meant.
Read the explanation of Muffler bearings →Fake partsPiston return springs in an ordinary crankshaft-driven car engine are a fake-parts joke. The connecting rod and crank mechanism control the piston’s motion; a separate spring does not pull each piston back for the next stroke.
Read the explanation of Piston return springs →Wordplay errandsElbow grease is an expression for physical effort, not a special workshop lubricant. Products can borrow the phrase as a brand name, but the traditional errand asks an apprentice to fetch a container of effort.
Read the explanation of Elbow grease →Fake suppliesA “wireless cable” offered as a cable with no wire or physical connection is a wordplay joke. Wireless networking and cable-replacement systems are real technologies; they are not a length of cable with its existence removed.
Read the explanation of Wireless cable →Fake toolsThe ordinary pickup magnet that conveniently collects brass, copper or aluminium workshop chips is a joke. Those metals do not respond like iron to a basic pickup magnet. Special electromagnetic effects and industrial separation processes are a different subject.
Read the explanation of Brass / aluminium magnet →Fake suppliesLoose holes in a box are a joke about treating an absence as a stocked object. Drilled parts, washers, punches and templates are real. An empty opening cannot be supplied independently of the material around it.
Read the explanation of Box of holes →Fake suppliesA box of loose rope knots is an imaginary supplies errand. Knots are configurations made in cordage, not a separate consumable you can add to a rope like a bolt. Real knot samples and decorative pieces do exist.
Read the explanation of Box of assorted knots →Fake fluidsHammer grease for the swing of an ordinary hand hammer is a joke. Powered hammers and other machinery may need specified lubricants; the plain hand-tool errand imagines a maintenance point that is not there.
Read the explanation of Hammer grease →Fake toolsA wall expander that conveniently enlarges a finished room without rebuilding it is a fake-tool joke. Expanding anchors, wall fixings and adjustable building components are real; the claimed room-growing gadget is the imaginary part.
Read the explanation of Wall expander →Fake toolsAn eye measure in the apprentice joke is an imaginary instrument for a judgement someone is making “by eye”. Measuring tools are real; a casual visual estimate does not become a special stores item because it gets a technical name.
Read the explanation of Eye measure →Impossible errandsDial tone is an audible telephone signal, not a substance that can be collected in a bucket. The request turns an intangible part of telecommunications into a supposed stores supply.
Read the explanation of Bucket of dial tone →Fake toolsA bacon stretcher that restores cooked bacon to its original size is a kitchen fool’s errand. The imagined tool promises to undo shrinkage as conveniently as a board stretcher reverses a short cut.
Read the explanation of Bacon stretcher →Fake toolsA soufflé pump is an imaginary gadget for pumping up a soufflé. The rise comes from the ingredients and cooking process, not from an inflation tool borrowed from the restaurant next door.
Read the explanation of Soufflé pump →Fake suppliesThe traditional dough-repair-kit errand asks for an imaginary boxed kit to fix pizza dough. Real dough can be handled or adjusted in ways appropriate to a recipe, but that does not establish the fictional stores item.
Read the explanation of Dough repair kit →Fake partsChicken lips in the classic kitchen shopping errand are imaginary ingredients. Chickens have beaks, not the mammalian lips suggested by the request. A dish or novelty food using the name is a separate matter.
Read the explanation of Chicken lips →Fake partsA leg of salmon is an imaginary cut in the traditional food-order joke. Salmon have fins, not legs. “Leg” may appear in a playful dish name, but it is not a literal fish joint to fetch from a supplier.
Read the explanation of Salmon legs →Fake toolsAn oven-key errand can be a joke, but ovens with locks, controls or genuine keys exist. The classic prank concerns an invented key for an appliance that has no such requirement. Identify the actual oven before calling the request fake.
Read the explanation of Oven key →Fake toolsThe kitchen prank asks for a special handed version of ordinary symmetric tongs or a plain pan. Genuine ergonomic or specialist designs can differ, so the joke concerns a made-up distinction on the basic equipment already available.
Read the explanation of Left-handed tongs →Fake toolsA left-handed version of a normal straight broom is a classic unnecessary-handedness joke. Some cleaning equipment has specialised shapes or ergonomic features; the plain broom in the prank works in either hand.
Read the explanation of Left-handed broom →Impossible errandsProp wash is airflow produced by a propeller. Rotor wash is the related airflow from a rotor. Asking you to fetch either in a cleaning bucket turns a real aviation term into an impossible-supplies joke.
Read the explanation of Prop wash →Wordplay errandsA flight line is an aircraft parking and servicing area, not a type of cord sold by the roll. The joke treats “line” as rope or cable and asks you to fetch a measured length of the place.
Read the explanation of Roll of flight line →Fake suppliesRPM means revolutions per minute: a rate of rotation, not a consumable packed in a box. Spare RPMs are an imaginary stores item, though real equipment settings and performance questions can involve rotational speed.
Read the explanation of Box of RPMs →Fake materialsDehydrated water sold as a powder to which you add water is a circular joke. Real water-treatment tablets and drink powders have useful functions, but they are not water with the water removed.
Read the explanation of Dehydrated water →Fake suppliesA can of compression to restore an engine’s compression as though topping up a fluid is a joke. Compression describes what happens to a gas and a condition of the system, not a missing consumable called compression.
Read the explanation of Can of compression →Impossible errandsAn ordinary can of vacuum that you pour into equipment is an imaginary supply. A vacuum is a condition of reduced pressure, not a fluid to decant. Sealed evacuated containers exist, but they are not the transferable material promised by the joke.
Read the explanation of Can of vacuum →Fake suppliesHigh-speed air as a special imaginary tyre refill is a prank. Tyre pressure, inflation specifications and approved gases can be real matters; a performance label is not a substitute for them.
Read the explanation of High-speed air →Fake partsAerodynamic lug nuts in the classic new-worker errand are a comic parts request. Real wheel fasteners have critical dimensions and specifications; their claimed aerodynamic benefit should not be inferred from the joke’s name.
Read the explanation of Aerodynamic lug nuts →Fake partsIn the standard engine joke, spark plugs for a conventional compression-ignition diesel are the wrong part. Such engines ignite fuel through compression conditions rather than ordinary spark ignition. Glow plugs are real and have a different role.
Read the explanation of Diesel spark plugs →Fake partsA coolant-radiator cap for a classic air-cooled Volkswagen Beetle is a context-specific joke: that engine does not use the conventional liquid-cooling radiator being described. Later vehicles using the Beetle name are a different matter.
Read the explanation of Air-cooled Beetle radiator cap →Fake toolsA lot stretcher that expands a car dealership’s parking area is a fool’s-errand tool. A yard can be reorganised or extended through real planning and work; a portable device cannot manufacture more plot area on demand.
Read the explanation of Lot stretcher →Fake toolsA glass stretcher that enlarges a finished pane to fit an opening is the glazing version of the too-short-material joke. Glass manufacturing and forming are real processes; they are not the effortless repair offered by the errand.
Read the explanation of Glass stretcher →Fake materialsRubber nails offered for ordinary timber fastening are a fake-material errand. Rubber components and decorative novelty nails can exist; they do not make the joking substitute a suitable structural fastener.
Read the explanation of Rubber nails →Fake materialsOrdinary metal-arc welding rods made of wood to repair lumber are an imaginary supplies joke. Joining wood, welding thermoplastics and specialist bonding research are real topics; they do not validate this fictitious rod for a standard welding job.
Read the explanation of Wood welding rods →Fake toolsA sharpener for the striking face of an ordinary rubber mallet is a fake maintenance tool. A mallet is meant to strike with a suitable face, not acquire a cutting edge like a chisel.
Read the explanation of Rubber mallet sharpener →Fake toolsA hole relocator that moves an existing hole without altering the surrounding material is a fake tool. Repairing or reworking a misplaced feature can be possible, but it is an actual process, not the magical relocation the joke promises.
Read the explanation of Hole relocator →Fake materialsAdd-a-thou paste is a machine-shop joke about restoring a thousandth of an inch to a dimension that was cut undersize. Real coating, deposition and repair processes exist; a universal dab of imaginary precision paste is not one of them.
Read the explanation of Add-a-thou paste →Fake toolsA part stretcher that restores an undersize finished component is a machining joke. Industrial stretching and forming equipment are real; they do not provide an automatic, specification-preserving undo button for any cut part.
Read the explanation of Plate / part stretcher →Fake toolsA neutral drill bit pitched as the third option between left- and right-hand cutting drills is a workshop joke. Actual drill geometry and cutting direction matter; “neutral” is not an ordinary request for a rotating drill that somehow chooses neither.
Read the explanation of Neutral drill bit →Wordplay errandsEight sixteenths of an inch equals half an inch. The joke asks you to search for an unfamiliar-sounding size while an equivalent half-inch tool may already be available. The dimension is real; the extra search can be unnecessary.
Read the explanation of Eight-sixteenths wrench →Fake suppliesDecibels express ratios or levels on a logarithmic scale, depending on the stated reference. They are not physical supplies sold in a packet. The joke turns a measurement into inventory.
Read the explanation of Packet of decibels →Fake suppliesA box of loose map grid squares is a military fool’s-errand joke. Maps with grids are real; a coordinate square is a defined area or reference on a map, not a spare part to issue independently.
Read the explanation of Box of grid squares →Fake suppliesBatteries for the core speech circuit of a sound-powered telephone are the traditional naval joke: the system uses sound energy through its transducers. Associated signalling arrangements can vary, so the exact equipment still matters.
Read the explanation of Sound-powered phone batteries →Fake suppliesBatteries for a conventional chemical glow stick are a joke. Its light is produced by a chemical reaction, not a battery-powered lamp. Electronic light sticks are real, so clarify which item is meant.
Read the explanation of Chemlight batteries →Fake fluidsGrease for a relative bearing is nautical wordplay. In that expression a bearing is a direction relative to a reference, not a rotating mechanical bearing to lubricate. Actual compass and mechanical equipment are separate matters.
Read the explanation of Relative bearing grease →Wordplay errandsA waterline or shoreline packaged as rope is a wordplay errand. A boat’s waterline describes a boundary or level, and a shoreline is a place. Actual water-supply hose is a different legitimate meaning of water line.
Read the explanation of Spool of waterline →Fake suppliesThe key of the starboard watch is a naval fool’s-errand phrase that treats a duty watch as if it were a lockable object or a winding watch. The word watch is doing the work; an actual shipboard key request needs a named lock.
Read the explanation of Key of the starboard watch →Fake toolsA left-handed smoke shifter is an imaginary device in camping and workplace folklore. Fans and ventilation systems are real; the joke imagines a special handed implement that conveniently tells drifting smoke where to go.
Read the explanation of Left-handed smoke shifter →Fake suppliesEnglish stock appears in reported kitchen fool’s errands as a supposedly missing special stock. Unlike a salmon leg, it is not intrinsically impossible: kitchens can use regional recipe names. The joke depends on an invented local requirement.
Read the explanation of English stock →Fake toolsA special left-handed version of a plain paintbrush is the usual joke. Brushes can have different shapes, handle designs and uses, but holding an ordinary brush in the other hand does not create another product.
Read the explanation of Left-handed paintbrush →Fake suppliesFuel for an unpowered glider is the joke. Motor gliders and self-launching sailplanes can have engines, so a blanket statement that all gliders need no fuel would be wrong. Identify the aircraft before judging the request.
Read the explanation of Glider fuel →Fake suppliesA film roll for an ordinary digital camera is a wrong-technology joke. Digital cameras record image data electronically. Film cameras and hybrid specialist equipment are separate systems, so identify the actual device.
Read the explanation of Film for a digital camera →Fake suppliesNetwork packets are units of transmitted data, not bags of physical objects from stores. A loose token supposedly falling out of a token-ring network uses the same metaphor-made-literal joke.
Read the explanation of Packet of data →Fake suppliesSquelch is a radio receiver function for suppressing unwanted output under specified signal conditions, not an ordinary fluid in a can. The joke turns a control term into a maintenance consumable.
Read the explanation of Can of squelch →Fake toolsA grape grater is a reported absurd-tool errand. Ordinary graters and specialised food-preparation equipment are real; this joke proposes an oddly impractical dedicated gadget without a meaningful recipe task.
Read the explanation of Grape grater →Fake suppliesSauerkraut seed in the joke treats a prepared fermented cabbage food as though it were a separate plant to grow. Cabbage seeds are real; sauerkraut is made through a food process rather than harvested as its own seed variety.
Read the explanation of Sauerkraut seed →Fake toolsA fire warmer in a fool’s errand is an unnecessary device supposedly needed to warm something already producing heat. Real heaters and combustion equipment exist; the circular request is the joke.
Read the explanation of Fire warmer →Fake suppliesAn extension lead with no cable that still extends the physical cable connection is a joke. Portable power stations and battery-powered equipment are real, but they are different products with actual specifications.
Read the explanation of Cordless extension lead →Real toolsA duct stretcher is real. In sheet-metal work it can hold or pull duct edges into position for joining. Being sent for one is not automatically an apprentice prank, even if you know the board-stretcher joke.
Read the explanation of Duct stretcher →Real toolsFish tape is a real tool used to route wiring through spaces such as conduit. The unusual name can sound like a prank to a new apprentice, but the request may be entirely genuine.
Read the explanation of Fish tape →Real toolsLeft-hand drill bits are real cutting tools designed for the specified opposite direction of rotation. They are not the same joke as a plain left-handed screwdriver. Their actual use depends on the tool and application.
Read the explanation of Left-hand drill bit →Real toolsTools and specialist systems for making square holes are real. A hollow-chisel mortising setup uses a chisel around an auger; other specialist methods also exist. The classic joke pretends a normal round twist drill alone will magically leave square corners.
Read the explanation of Square-hole drill →Real suppliesR718 is the refrigerant designation for water. The joke is the grand technical name for a familiar substance, not an assertion that the designation is fake. Actual refrigeration applications require the proper specification and instructions.
Read the explanation of R718 →Real suppliesSpeckled and multicolour decorative coatings are real. A request for polka-dot paint may still be a joke if it promises neatly spaced geometric dots with no technique, but the blanket claim that paint can only dry one colour is wrong.
Read the explanation of Polka-dot paint →Real toolsA biscuit joiner is a real woodworking tool for preparing joints that use small joining biscuits. The biscuit is a woodworking component, not food. The unusual name is not evidence that an apprentice has been sent for a fake tool.
Read the explanation of Biscuit joiner →Real toolsA story stick is a real woodworking layout reference for recording or transferring positions and dimensions. It is not a talking stick or an imaginary measuring device. The name can be unfamiliar while the requested reference is entirely genuine.
Read the explanation of Story stick →Real toolsA nut splitter is a genuine tool category for splitting a fastener nut in specified removal situations. Nut means the threaded component here, not a snack. Its existence does not establish suitability for every stuck fastener or permission to improvise removal.
Read the explanation of Nut splitter →Real toolsA nibbler is a real sheet-metal cutting tool category. The playful-sounding name is not an apprentice prank. A genuine request must still specify which tool and material application are intended; recognising the name is not an operating instruction.
Read the explanation of Nibbler →Real toolsA dead blow hammer is a genuine striking-tool category designed to reduce rebound. Dead blow is a design description, not a claim that the hammer is broken. A particular tool’s construction and intended application must be identified rather than guessed from its nickname.
Read the explanation of Dead blow hammer →Real toolsA crowfoot wrench is a real compact wrench attachment, with genuine products designed to pair with a ratchet. Crowfoot or crow’s foot is an ordinary tool name, not a request for an animal part. Its size, drive and application still need to be specified.
Read the explanation of Crowfoot wrench →