A problem looking for a miracle
Construction humour often begins with a fit problem. A board is short, an opening is small or there is nowhere convenient above the work to attach something. The fake tool offers the correction everyone would like without supplying a process that can do it.
A board stretcher returns the cut-off length. A wall expander makes the surroundings cooperate. A sky hook pretends that the air itself is a support. The joke is recognisable because the underlying practical inconvenience is familiar.
The site is not the prop
Keep these expressions in conversation during a suitable pause. Nobody needs to climb, lift, cut or move a real object to reveal the fiction. The illustrated catalogue can show a floating hook while the actual lifting plan remains entirely separate.
Requests involving access equipment, load support or structural changes deserve clear answers. A genuinely branded lifting device may use a joke-like name, so ask for the model and intended support rather than deciding by the word alone.
Shared language across trades
The same family changes its material as it moves between workers. Cable, pipe, board and finished-part versions are related, but their real exceptions differ. The wire entry needs a fencing qualification; the pipe entry needs the distinction between diameter-changing tools and imaginary added length.
Other jobsite names exploit location or absence. A skirting-board ladder is comic because the trim is near the floor. A box of drill holes is a stock order for the missing space rather than the surrounding material. Precise sizes can make those requests sound oddly respectable.
Use this hub to follow the differences rather than collect a list to issue to one apprentice. A shared fake-tool quiz is a better setting for the catalogue. Everyone can be surprised by a real square-hole system, and nobody has to lose an afternoon to prove they want to help.

The names you might hear here
These examples show how the names work. Follow each entry for alternative names, a suggested line and a comeback.
Board stretcher
A board stretcher that restores missing length to a board cut too short is an apprentice joke. Wood can change dimensions with moisture, but an ordinary workshop tool cannot put the sawn-off material back.
Carpentry gives the prank a ready-made plot: a piece has been measured, sawn and found wanting. The imaginary board stretcher promises to put the missing length back without admitting the cut needs another solution. It is less a tool than a warranty against arithmetic.
The name follows the pattern of real workshop equipment. There are clamps, presses and stretchers in other industries, so a newcomer may imagine a pair of grips and a long screw. The impossibility concerns the promised result, not whether someone could build a convincing-looking contraption.
A useful question: Ask how much length it adds and whether the finished board keeps its section and strength. The increasingly elaborate answer is usually the performance.
Sky hook
A sky hook that supports a load from thin air is a joke. Real lifting products use the name Skyhook, so the name alone is not proof of a prank. The imaginary version has no supporting structure at all.
The setup starts with a perfectly reasonable problem: there is no convenient place above the work to hang something. The proposed solution quietly removes the need for an anchor, a frame or any other connection to the world. Gravity is expected to read the purchase order and cooperate.
A believable capacity rating makes the fiction sound industrial. The “larger” sky hook is no more possible than the small one if both float unsupported. A real hoist, crane or lifting aid still transfers its load through a designed support.
A useful question: The tell is “hang it from nothing”. A real item with a product name needs a model and an actual support arrangement.
Wall expander
A wall expander that conveniently enlarges a finished room without rebuilding it is a fake-tool joke. Expanding anchors, wall fixings and adjustable building components are real; the claimed room-growing gadget is the imaginary part.
The joke takes a genuine fit problem and offers the convenient opposite of cutting the item smaller. If a cabinet or panel does not fit the opening, the supposedly specialist tool will make the opening fit it instead.
Real alteration work is a design and construction task. It does not become a safe shortcut because the tool has an official-sounding name. The fictional expander promises to move a wall without confronting what the wall supports or contains.
A useful question: Ask what the actual alteration is and who has specified it. A magic fit correction is not a work instruction.
Box of holes
Loose holes in a box are a joke about treating an absence as a stocked object. Drilled parts, washers, punches and templates are real. An empty opening cannot be supplied independently of the material around it.
The request often includes a diameter, which sounds exactly like a legitimate fastener order. Specifying three-quarter-inch holes rather than simply holes gives the apprentice a concrete detail to remember while concealing the missing object.
The grammar is doing the work. Stores can issue something with a hole, something that makes a hole, or a pattern showing where a hole belongs. The joke asks for the hole alone, as if all three could be reduced to one bag of spare emptiness.
A useful question: Ask “holes in what?” A real stores request should supply a material or a tool, not just a void.
Skirting-board ladder
The skirting-board ladder is a workshop joke about using a ladder to reach trim close to the floor. “Baseboard ladder” conveys the same idea in language more familiar to many North American readers.
Skirting boards sit along the bottom of a wall. Giving the job a special ladder makes the height requirement wonderfully backwards: the thing being reached is already down where the ladder’s feet would be.
A small step, work platform or access aid can have a real use in a particular task. The gag is the explanation that low trim requires a dedicated tall-access tool. Do not let a joke settle a genuine decision about working posture or access.
A useful question: The clue is the height of the object. Ask what part of the trim is supposed to be out of reach.
Glass stretcher
A glass stretcher that enlarges a finished pane to fit an opening is the glazing version of the too-short-material joke. Glass manufacturing and forming are real processes; they are not the effortless repair offered by the errand.
A pane that does not fit is an expensive-looking problem, so the apprentice may want to believe a specialist tool solves it. The request offers helpfulness first and absurdity a second later.
The familiar noun stretcher supplies the fake mechanism. If the speaker means equipment for carrying or supporting glass, that is a different legitimate request and needs its proper specification. This entry concerns the claim that missing pane dimensions can simply be pulled back into existence.
A useful question: Ask whether this is a carrying aid or a claim about resizing a pane. Do not test the resizing claim.
Pipe stretcher
In the classic apprentice errand, a pipe stretcher is an imaginary tool for making a cut pipe longer. Real tube expanders and swaging tools change ends or diameters; that does not make them a magic remedy for a missing length.
Plumbing and pipefitting contain plenty of equipment a beginner has never seen. A request for one more named tool can slip past the mental checkpoint, especially when it comes with an exact pipe size. The joke borrows that legitimate unfamiliarity.
The problem is the promised correction. Changing the shape of a tube under a controlled process is not the same as restoring a piece that was cut too short for its intended service. An earnest explanation about “stretching it a bit” should not turn into an experiment.
A useful question: Clarify whether the request is for an actual expander or for a tool to undo the cut. Ask the supervisor to identify the real stores item.