
Is a dead blow hammer real or broken?
A dead blow hammer is real. The name describes a design intended to reduce rebound, not a hammer that has stopped working. Tekton describes a shot-filled example. Construction varies between models, and the name does not guarantee zero rebound.
For a name quiz, try “Dead blow hammer: damaged stock or real design?” Then give the answer: “Real design. The name is having a dramatic day.” This is original wordplay, not a recorded workshop exchange.
Dead blow hammer versus rubber mallet
A rubber mallet describes a tool with a rubber striking head; dead blow describes a rebound-reducing design. Those features can overlap, but one name does not guarantee the other. Check the particular tool’s description.
The rubber-mallet-sharpener joke invents a different feature: a cutting edge on an ordinary striking face. A real hammer design does not make that request genuine.
An original reply is “The hammer has a real design. The mallet has no chisel edge to sharpen.” The distinction works as a conversation; no tool demonstration is needed.
Is a crowfoot wrench a real tool?
Yes. A crowfoot wrench is a real compact wrench attachment. Tekton lists an example designed to pair with a ratchet. The bird association is in the name, not on the parts list.
An original comeback is “The wrench is real; the bird is not on the parts list.” Give the answer first so that recognising an unfamiliar name becomes a shared discovery.
For a real request, ask for the fastener size, drive size and tool reference. Crowfoot identifies the category, not every specification.
Crowfoot spanner, crow’s foot wrench and drive sizes
Crowfoot spanner, crow’s foot wrench and crow foot wrench are variations of the same name here. Spanner and wrench are regional wordings; the spacing and apostrophe do not change the tool.
Drive size describes the connection to the ratchet. Fastener size describes the opening that fits the fastener. If an order gives two measurements, ask which is which. Knowing the names does not settle a particular setup or torque calculation.
The 8/16 wrench plays a different trick: eight sixteenths is another way of writing one half. A useful quiz question is “Are these two measurements, or two ways of writing one?” The answer depends on the specification.
Real attachment versus imaginary handed wrench
The left-handed-wrench joke adds an unexplained handedness requirement to an ordinary tool. A real crowfoot attachment does not establish that requirement. Ask what feature the speaker means; specialist designs need their actual specifications.
A fixed-size metric crowfoot also differs from the metric-adjustable-wrench joke. A specified opening and an adjustable range are different descriptions. The word metric alone does not identify the tool being requested.
For more garage wordplay, read mechanic apprentice jokes and engine parts. In a mixed real-or-fake quiz, ask for a short explanation after each answer.

Worked examples: names and explanations
Quick answers to the names in this guide. Each entry has the full explanation, alternative names and a comeback.
Dead blow hammer
A dead blow hammer is a genuine striking-tool category designed to reduce rebound. Dead blow is a design description, not a claim that the hammer is broken. A particular tool’s construction and intended application must be identified rather than guessed from its nickname.
A useful question: Ask which rebound-reducing design and actual model are meant. The word dead does not establish an unusable tool.
Crowfoot wrench
A crowfoot wrench is a real compact wrench attachment, with genuine products designed to pair with a ratchet. Crowfoot or crow’s foot is an ordinary tool name, not a request for an animal part. Its size, drive and application still need to be specified.
A useful question: Request the exact fastener size, drive and tool reference from the responsible person. A bird-related name is not proof of fiction.
Rubber mallet sharpener
A sharpener for the striking face of an ordinary rubber mallet is a fake maintenance tool. A mallet is meant to strike with a suitable face, not acquire a cutting edge like a chisel.
A useful question: Ask which cutting edge is meant to be restored. If the tool is a plain mallet, that question reaches the punchline.
Left-handed wrench
Left-handed wrench requests are a traditional joke, but adjustable wrenches with different adjustment directions and other specialist designs do exist. Ask which model or mechanism is intended before assuming the whole category is imaginary.
A useful question: Ask what makes this wrench different. A model, adjustment direction or task is useful; a grin and a demand for “the other-handed one” are clues.
Original editorial guide. Reviewed 2026-10-05. Corrections are welcome.